Flushing engine nozzles

in #engine • 14 days ago

Automotive fuel consists of many components that gradually clog the fuel system. First of all, the nozzles are clogged. If you use low-quality gasoline, the pollution process occurs faster. Procedure car is carried out with the help of ultrasound or special liquids.

Injectors.jpg

Stages of nozzle clogging

The injectors themselves are simple electromagnetic valves designed for dosing gasoline. There are three stages of contamination:

At the first, the difference between productivity is no more than 7%. In this state, there are no obvious problems with the engine, but the fuel consumption is already increasing to three liters per hundred kilometers. If bad gasoline is used, then detonation is detected.
At the second stage of clogging, the difference in productivity reaches 15%. The engine starts to whine, there are cotton balls in the exhaust, a sharp smell can be heard from the exhaust pipe.
At the third stage, there is a difference in nozzle performance of up to 50%. The engine practically jumps out from under the hood. When you press the gas, there are cotton balls, and all the problems listed above are brighter.
There are 2 methods of washing: ultrasonic and liquid.

chistka-forsunok.jpg

Flushing nozzles with liquid
Ultrasonic washing is used only in the case of severe clogging of the nozzles, which drivers do not understand, as it requires engine disassembly. First, the fuel supply system is turned off so that the washing liquid does not get into the gas tank. If this is not done, the deposits from the walls will clog the fuel filter and the fuel pump mesh, and ultrasonic washing of the injector will also be required.

Washing units supply liquid under pressure to nozzles, and the quality of washing directly depends on the quality of the liquid.

What liquid is used to flush the injector?

injectors-on-test1.jpg

There are many liquids on sale. These are funds in bottles or cans. Products from such manufacturers are considered the most popular:

Wynn's is an effective valve descaler. It is recommended to use this tool only on old cars, as the liquid disables the spark plugs;
Liqui Moly is a less aggressive injector cleaner, but still leaves soot on the valves. Auto chemistry is used only for flushing fuel systems with direct fuel injection;
Laurel is an expensive and very aggressive washing liquid (usually not used by professionals);
Carbon Clean is a golden mean in terms of price and efficiency.

Choosing a tool is a responsible step. Many problems can arise when using too aggressive means. Some of them are suitable exclusively for certain brands of cars.

2023-10-29-10.46.42-1-1024x538.jpg

Pros and cons of liquid injector flushing
It is better to entrust the cleaning process to the specialists of our company, because the wrong choice of means is a huge risk for the car owner. First of all, the nozzles themselves can be damaged, which threatens with large costs. Some liquids lead to the complete failure of the nozzles, which requires their replacement. The amount of expenses can be up to 700-800 dollars and more (depending on the car brand).

By contacting the specialists of the ATL company, you can not worry about your car. This procedure is useful not only for the injector itself, but also allows you to remove soot from the combustion chambers and valves. It is recommended to undergo the procedure after every 30 thousand kilometers of mileage.